By Adam Dragos · Last updated: November 2026
An exhibition stand at Salón Gourmets 2027 means building a food and drink stand at IFEMA Madrid for the fair’s 40th edition, from 26 to 29 April 2027, in Halls 3 to 7. The organizer, Grupo Gourmets, sells space-only plots from 9 m² and sets its own rules for walls, power, extraction hoods and a 15 March 2027 deadline.

This guide is for food and beverage producers, importers, cooperatives, regional pavilions and premium brands that have booked, or are weighing up, a space-only stand at Salón Gourmets 2027. Everything below comes from the organizer’s 2027 “Solo Suelo” (space-only) document, its fact sheet and its exhibitor dossier, all linked in the relevant sections. Where a detail is not yet published for 2027, we say so and tell you what to ask.
We write this from the builder’s side. We design and build custom wood, modular and turnkey stands, and we have strong experience at IFEMA Madrid. The aim is simple: turn the organizer’s rules into a stand plan that passes approval the first time and works for buyers on the floor.
Key takeaways
- Salón Gourmets 2027 (40th edition) runs Monday 26 to Thursday 29 April 2027 at IFEMA Madrid, Halls 3, 4, 5, 6 and 7, with 66,000 m² of exhibition space (>Salón Gourmets fact sheet).
- Opening hours are 10:00 to 19:00 from Monday to Wednesday and 10:00 to 17:00 on Thursday (>space-only document).
- Space-only is charged as a registration fee plus a space fee, both plus VAT, with corner supplements for one or two corners. Confirm the current official exhibitor tariff.
- Space-only starts at 9 m². Corners are allocated from 24 m², according to the organizer’s needs.
- You must contract a minimum power of 130 W/m² through the organizer.
- Carbon-filter extraction hoods are mandatory to prevent smells and smoke.
- Two-storey stands are not allowed, and walls facing aisles cannot be blind over more than 50% of each façade.
- The technical project, your builder’s name and phone, and online service orders are all due by 15 March 2027.
- The fair is trade-only: accredited professionals with ID, and nobody under 18.
What is Salón Gourmets and who visits it?
Salón Gourmets is the international fair for quality food and drink organized by Grupo Gourmets at IFEMA Madrid. It is a trade-only show for restaurants, hotels, distribution, catering and specialist retail, and the 2027 edition is its 40th. Visitors must be accredited professionals and show official ID at the entrance.
The organizer describes the show as a commercial meeting point for the gourmet sector: restaurants, hospitality, distribution, catering and specialist shops (>Exhibit at Salón Gourmets). Grupo Gourmets was founded in 1976 and publishes food, travel and wine media alongside its fairs, according to its own website.
The fact sheet gives these figures for the 39th edition. They are the organizer’s own headline figures, not an audited count:
| 39th edition (organizer figures) | Value |
|---|---|
| Exhibitors | 1,993 |
| Products on show | 55,000+ |
| International buyers | 16,000+ |
| Exhibition space | 66,000 m² |
Access rules shape your stand. Only previously accredited professional visitors get in, official ID (national ID card or passport) is required at the gates, and under-18s are not admitted at all, even with an adult (>fact sheet). Visitor tickets are listed at €85 at the venue or €60 online for one day, and €130 at the venue or €100 online for four days.
What this means for design: every visitor is a potential buyer, so your stand is a sales room with a tasting bar, not a sampling counter for passers-by. Plan for conversations, tastings and orders, not for crowd volume.
When is Salón Gourmets 2027, and when do you build?
Salón Gourmets 2027 opens on Monday 26 April and closes on Thursday 29 April 2027. Hours are 10:00 to 19:00 on the first three days and 10:00 to 17:00 on the last. The organizer has not published build-up and dismantling dates in the documents we checked, so confirm them in the exhibitor manual.
One clue sits in the space-only document: the parking pass included with each stand is valid from Thursday 22 April to Saturday 1 May 2027. That suggests build-up starts around 22 April and dismantling ends by 1 May, but it is not a confirmed build schedule. Treat it as UNVERIFIED until your exhibitor manual states the days and hours.
A working timeline that fits the organizer’s deadlines (our recommendation, not an organizer rule):
- November to December 2026: book space, confirm size and open sides, and decide between space-only, modular package or the organizer’s official design stand.
- January 2027: brief your builder with products, tasting plan, kitchen needs and meeting targets. Get a concept and an itemized quote.
- February 2027: freeze the design, calculate power, choose the extraction hood and appliances, and order graphics artwork.
- By 15 March 2027: technical project submitted for approval, builder name and phone entered in your exhibitor area, and all services and equipment ordered online.
- Late March to April 2027: production in the workshop, pre-assembly check, logistics for products and cold storage.
- Build-up window (to be confirmed): assembly, appliance tests, product delivery and a full tasting rehearsal before day one.
The 15 March date is the one that matters. Three separate obligations land on it, and a late technical project puts your whole build at risk.
How much does a space-only stand at Salón Gourmets 2027 cost?
Space-only at Salón Gourmets 2027 is charged by the organizer as a registration fee plus a space fee, both plus VAT, with corner supplements according to the number of open sides. Confirm the current official exhibitor tariff. The build, power upgrades, furniture, kitchen equipment and logistics are extra. Design and build starts from €120/m².
The prices come from the organizer’s 2027 space-only document (>40 SG Solo Suelo). Here is how the lines work:
| Line | Official rate | What it covers |
|---|---|---|
| Registration fee | See the official exhibitor tariff | File opening, admin, location allocation by order of registration, online exhibitor area, catalog and app listing, visitor data-capture app (QR) |
| Floor space (booked with the organizer) | See the official exhibitor tariff | Floor space, build and dismantle fee, stand cleaning during the show, passes, invitations, insurance, 24 h power consumption once minimum power is contracted |
| One corner (two open sides) | See the official exhibitor tariff | Supplement on the whole area |
| Two corners (three open sides or island head) | See the official exhibitor tariff | Supplement on the whole area |
Worked example (hypothetical, arithmetic only): a 24 m² space-only stand with one corner. Registration is 24 × €71 = €1,704. Space is 24 × €311 = €7,464. The corner supplement is 24 × €31.10 = €746.40. That gives €9,914.40 before VAT, or €10,905.84 with 10% VAT. This is the organizer’s space bill only, calculated from the published 2027 prices. Your stand build is a separate budget.
The space fee includes more than many exhibitors expect. According to the organizer, it covers:
- one four-day event invitation, plus eight one-day invitations for every 2 m² contracted;
- four exhibitor passes per stand up to 24 m², and one more for every additional 12 m², up to a maximum of 100 m²;
- one parking pass valid from 22 April to 1 May 2027;
- insurance, as set out in section 7.6 of the organizer’s internal rules;
- 24-hour power consumption and supply, once you have contracted the mandatory minimum power;
- the right to take part in the Hosted Buyer Program, the Innovation Area and the Organic Exhibition Area.
Lines that sit outside the space bill, and that we itemize in every quote: stand construction and graphics, flooring, extra power above the minimum, the electrical certificate and panel, extraction hoods and kitchen equipment, cold storage, water and drainage if your plan needs them, furniture, AV, rigging, transport, storage and on-site crew. Our exhibition stand cost guide explains each budget line, and our IFEMA Madrid stand costs and deadlines guide covers venue-side services.
What are the stand rules for space-only at Salón Gourmets?
Space-only exhibitors at Salón Gourmets must build at least flooring (carpet or a raised floor) and their own walls, fit inside the contracted plot, submit a technical project before 15 March 2027, and keep aisle-facing walls open over at least half of each façade. Two-storey stands are not allowed.
These rules come from the “Normas específicas” section of the 2027 space-only document. We group them by what they change in your design:
Structure and layout
- The stand must include, at minimum, carpet or a raised floor and walls. You cannot use your neighbors’ walls.
- The stand must fit within the contracted floor area (minimum 9 m²).
- No two-storey stands. If you need private meeting space, it goes on the ground floor.
- Walls facing aisles and the front cannot be blind over more than 50% of each façade.
- The back faces of panels must have a quality finish without decoration.
Accessibility
- Stands built on a raised floor or platform must have access ramps for people with disabilities. Plan the ramp in the floor plan, not as an afterthought, because it takes space from your plot.
Paperwork
- The technical project must be sent to the organizer for approval before 15 March 2027.
- You must enter your builder’s name and phone number in your exhibitor area by 15 March 2027.
- Services and equipment must be ordered through the online exhibitor area by 15 March 2027.
After the show
- Your builder or supplier must remove the carpet after the event. Budget the crew time for it.
The 50% open-façade rule is the one we see designers miss most often on food stands. A storage room, a kitchen and a meeting room all want solid walls, and on a 3-sided stand they quickly add up to more than half a façade. Put back-of-house rooms on the closed side, or against the aisle side with glazing or open shelving, and check every façade separately. For a wider view of IFEMA paperwork, see our guide to exhibition stand contractor rules at IFEMA Madrid.
How do power, cooking and extraction work on a Salón Gourmets stand?
Every Salón Gourmets space-only stand must contract a minimum power of 130 W/m² through the organizer, plus any extra power needed. The stand needs an electrical certificate, connection and panel, and carbon-filter extraction hoods are mandatory to prevent smells and smoke from cooking.
On power, the organizer’s rules are specific:
- You contract the mandatory minimum power (130 W/m²) and any additional power through the organizer.
- The stand must have an electrical certificate, a connection and an electrical panel.
- If your stand builder does not supply these, or if the builder is a foreign company, you must contract them through the organizer.
- Once the minimum power is contracted, 24-hour consumption and supply are included in the space fee.
For a 24 m² stand, the minimum works out at 24 × 130 W = 3,120 W, about 3.1 kW (arithmetic from the organizer’s figure). That covers lighting and a few small loads. It will not run an induction hob, an oven, a coffee machine, a slicer and two display fridges at the same time. Add up the real rated power of each appliance and order the difference as additional power before 15 March.
Two details matter on food stands:
- 24-hour supply. Fridges and cold displays need power overnight. The organizer includes 24 h consumption once the minimum is contracted, but you should confirm in the manual which circuit stays live overnight and keep cold equipment on it.
- Extraction. Any cooking or heating that produces smells or smoke needs a hood with a carbon filter. That is a design element, not an accessory: it needs a wall or ceiling to hang from, power and a service route for filter changes.
Our exhibition stand power plan walks through load calculation. If you need a sink or dishwasher, our water and drainage brief explains what to ask the venue, and our food sampling and allergen brief covers serving rules and labeling at tastings.
Should you choose space-only, a modular package or the official design stand?
Salón Gourmets offers three formats: free design on space-only (stand libre) for exhibitors with their own project, a modular stand with a preset structure, and an official design stand aligned with the show’s look. Space-only gives full control and costs most effort. The two packages save time but limit layout and branding.
The organizer’s “Exhibit” page lists the three options (>Exhibit at Salón Gourmets). Package prices and inclusions for 2027 were not in the documents we checked, so compare them against your own brief.
| Format | Best for | Watch out for |
|---|---|---|
| Space-only (stand libre) | Brands with a clear tasting concept, kitchen, meeting room or strong visual identity | You own the technical project, power, hood and the 15 March deadline |
| Modular package | First-time exhibitors, small producers, tight timelines | Fixed structure, limited kitchen and storage options |
| Official design stand | Exhibitors who want a polished look with minimal design work | Less room to differentiate from neighbors |
Our view from builds at IFEMA: if you plan to cook, run structured tastings or hold buyer meetings, space-only is usually worth it, because the layout has to serve the workflow. If you are showing a handful of packaged products and want a low-risk first edition, a package can be the right call. A custom build does not have to mean a one-off. Modular systems such as Aluvision and beMatrix can be combined with custom wood carpentry and reused at other fairs. Our custom vs modular stand guide compares the two in detail.
How do you design a food and drink stand that sells to trade buyers?
Design a Salón Gourmets stand around three flows: tasting, conversation and storage. Buyers need to taste quickly, talk without blocking the aisle and leave with prices and samples. Put the tasting bar on the most open side, the meeting area behind it and storage on the closed side.
Because the audience is all trade, we plan food stands around the buyer journey rather than around foot traffic. A practical layout logic:
- Front edge: the tasting bar. One bar at counter height, on the busiest aisle, with a clear surface for samples and a spittoon or tasting cups if you pour wine.
- Second zone: the product wall. Shelving that shows the range at eye level, with clear pack shots, price-list QR codes and the origin story. Open shelving also helps you meet the 50% open-façade rule.
- Third zone: the meeting table. Two to four seats, slightly back from the aisle, so a buyer can sit for ten minutes without becoming part of the queue.
- Back of house: storage and prep. Stock, cool boxes, glassware, waste and a small prep counter. Size it for a full day of tastings, because restocking through the aisles during opening hours is slow.
Materials matter on food stands. Surfaces should be easy to clean, counters should resist spills and heat, and lighting should render food colors honestly. Warm-white LED with good color rendering works better for cured meats, cheese, olive oil and wine than cool white. Our eco-friendly approach favors reusable modular frames and wood carpentry that can be refinished for the next show.
Do not forget the people who will stand there for four days. Anti-fatigue matting behind the bar, a secure place for bags and a hidden spot to take a break all keep staff sharper on day four.
How do you use the Hosted Buyer Program and the show’s features?
The space-only fee includes the right to take part in Salón Gourmets’ Hosted Buyer Program, a free service that arranges meetings with foreign buyers invited by the organizer in a Business Center with more than 1,000 m² of meeting offices and interpreting support. Book your meetings first, then design the stand to receive follow-up visits.
The organizer’s exhibitor dossier describes the program (>40 SG dossier):
- It is a free service for exhibitors aimed at export, with meetings allocated according to your participation format.
- Meetings take place in the Business Center inside the show, with more than 1,000 m² of meeting offices.
- Translation and interpreting are provided.
On results, the dossier reports that more than 250 importing companies took part at the last edition, 60% of them new, with 5,300 meetings in the program. The organizer’s website gives a different figure of 6,482 business meetings. We cannot reconcile the two, so treat both as organizer claims.
What this means for your stand: a buyer you meet in the Business Center often comes to your stand afterwards to taste the range. Have a seat and a tasting ready for that second visit, a printed or digital export price list, and a clear lead-capture routine. The space fee also includes access to the organizer’s visitor data-capture app that scans QR codes, so decide before the show whether you use it or your own tool. Our trade show meeting capacity guide helps you size the meeting area, and our 14-day lead follow-up plan covers what happens after.
The space-only fee also gives the right to take part in the Innovation Area and the Organic Exhibition Area. The organizer’s “Exhibit” page describes a showcase of new products presented by exhibitors, each labeled with product, brand, exhibitor and stand location. If you launch a product in 2027, ask how to enter it.
What rigging and other approvals should you plan for?
Hanging structures need approval from IFEMA Madrid. The organizer’s document tells exhibitors who want aerial structures or rigging to contact IFEMA at [email protected], with the structure set back 0.5 m from the plot edge. Submit rigging with your technical project, well before 15 March 2027.
A hanging banner is one of the best ways to be found in five halls. It also needs its own drawing, a load calculation and an approved rigging point. Ask early, because IFEMA works rigging requests in order. Our rigging approval checklist lists the documents a venue usually asks for.
Other paperwork to collect in the same file:
- fire-reaction certificates for carpet, panels, fabrics and decoration (our fire certificates and material register guide explains how to build one);
- the electrical certificate for the stand installation;
- your builder’s insurance and the organizer’s insurance terms (section 7.6 of its internal rules, which we have not seen in full);
- appliance data sheets for hoods, ovens and fridges, so the power order matches reality.
Common mistakes we see on food stands at IFEMA
The most common food-stand mistakes at IFEMA are under-ordering power, forgetting overnight supply for fridges, designing closed kitchens that break open-façade rules, leaving the technical project to the last week and running out of storage on day one. Each one is avoidable with a brief written in January.
From our builds at IFEMA Madrid, these are the problems that cost exhibitors most:
- Power ordered by area, not by appliance. The 130 W/m² minimum is a floor, not a plan. Rated power of every appliance goes into the order.
- No hood in the drawing. If you cook, the hood is mandatory. Adding it late means redesigning the ceiling or wall that carries it.
- Kitchens with four solid walls. They look tidy in a render and fail the 50% rule on the aisle façade.
- Ramp missing from a raised floor. A platform without a ramp fails the accessibility rule and steals space if added at the last minute.
- Storage sized for one hour, not one day. Restocking through aisles at 11:00 is slow, and stock in the meeting area looks messy.
- Missing the builder entry. The builder’s name and phone must be in your exhibitor area by 15 March. It is a two-minute task that is easy to forget.
Persona: a first-time regional producer at Salón Gourmets (hypothetical)
A hypothetical olive oil cooperative exhibiting for the first time on 24 m² with one corner faces a space bill of about €10,900 with VAT, a 3.1 kW minimum power order and one deadline: 15 March 2027. Its priorities are a tasting bar, a meeting table and Hosted Buyer meetings.
This is a scenario, not a client. The cooperative wants export buyers, so it books Hosted Buyer meetings as soon as the program opens. Its stand plan puts a three-meter tasting bar on the corner, open shelving on the second aisle side, a two-seat meeting table behind and a storage cupboard on the closed back wall. No cooking means no hood, but it still adds power for a fridge and lighting, checks the overnight circuit and orders everything online before 15 March. The builder handles the technical project, the electrical certificate and carpet removal after the show.
Frequently asked questions
When and where is Salón Gourmets 2027?
Salón Gourmets 2027, the 40th edition, runs from Monday 26 to Thursday 29 April 2027 at IFEMA Madrid in Halls 3, 4, 5, 6 and 7. It is open 10:00 to 19:00 from Monday to Wednesday and 10:00 to 17:00 on Thursday, for accredited trade visitors only, with official ID required.
How much does space-only cost at Salón Gourmets 2027?
The organizer lists a registration fee and a space fee, both plus VAT, with corner supplements for one or two corners. Confirm the current official exhibitor tariff. The stand build, extra power, equipment and logistics are separate costs; design and build starts from €120/m².
What is the minimum stand size at Salón Gourmets?
Space-only plots start at 9 m². Corners are allocated from 24 m² and according to the organizer’s needs.
Can I build a two-storey stand at Salón Gourmets?
No. The organizer’s 2027 space-only rules state that two-storey stands are not possible, so meeting rooms, storage and kitchens must fit on one level.
Do I need an extraction hood on my stand?
Yes, if you cook or heat food. The organizer requires carbon-filter extraction hoods to prevent smells and smoke, so include the hood in the technical project with its power and fixing point.
What is the deadline for the technical project?
The technical project must reach the organizer for approval before 15 March 2027. The same date applies to entering your builder’s name and phone and to ordering services and equipment online.
Plan your Salón Gourmets stand with a builder who knows IFEMA
We design and build custom wood, modular (Aluvision and beMatrix) and turnkey stands, with strong experience at IFEMA Madrid. Adam Expo Stand is an award-winning, eco-friendly stand builder with 639+ projects delivered. Based in Madrid, Spain, serving all of Europe with a focus on Spain and Portugal.
If you are exhibiting at Salón Gourmets 2027, start with your product list, your tasting plan and the 15 March deadline. Then discuss your stand brief with us, or request a stand proposal for IFEMA Madrid.
Sources: >Salón Gourmets fact sheet, >Exhibit at Salón Gourmets, >40 SG space-only document (PDF), >40 SG exhibitor dossier (PDF). Checked 5 November 2026.
About the author: Adam Dragos is CEO of Adam Expo Stand. Follow us on LinkedIn, Medium and Substack.