Exhibiting in Spain for German Companies: Stand Planning Guide

Last updated:

German companies can exhibit at Spanish trade fairs with a stand designed, built and installed by a Spain-based builder, either on their own plot or inside a German Pavilion. What changes compared with fairs in Germany is the rule book of each Spanish venue, such as a general 4 m height limit at IFEMA Madrid versus 5 m at Fira Barcelona Gran Via, plus documents in Spanish or English and approval deadlines set by each venue.

Quick facts

Which Spanish fairs matter for German exhibitors?

Start with the official calendars rather than lists on third-party sites. IFEMA Madrid’s calendar and Fira Barcelona’s calendar cover the two largest venues. In the south, check FYCMA in Málaga; across the border, Porto’s Exponor is often combined with Spanish shows in an Iberian plan.

For 2027, the German federal programme already lists two Spanish shows with a German Pavilion. Anuga Select Ibérica comes from the alliance between Koelnmesse and IFEMA Madrid to bring Anuga to Spain, according to the German Pavilion page. Our Anuga Select Ibérica 2027 stand guide covers that fair in detail.

German Pavilion or your own stand?

The German Pavilion is the joint stand of the federal government under the “made in Germany” umbrella. AUMA, the association of the German trade fair industry, explains that the federal programme mainly supports small and medium-sized companies, and that the German states (Bundesländer) run their own programs with different rules. Source: AUMA, funding for trade fairs abroad, checked on November 17, 2026.

A pavilion is a good first step: the implementing company handles the space and the stand. An independent stand gives you full control of the design, the size and the meeting areas. Many companies move from the pavilion to their own stand once a fair proves itself. If you go independent, you need a builder who works with the venue’s rules every week.

What is different from exhibiting in Germany?

Every venue writes its own technical rules, and figures you know from Frankfurt, Cologne or Munich do not carry over. These are the points that most often surprise teams coming from German fairs:

  • Height. At IFEMA Madrid, the general maximum is 4 m. One perimeter element may reach 6 m, except along the sides shared with neighbors, and with a 1 m setback all elements may rise to the maximum allowed. At Fira Barcelona Gran Via, the general maximum is 5 m; anything taller follows the complex-structure procedure.
  • Ceilings. IFEMA does not allow a fully closed stand ceiling unless it is fabric, micro-perforated or another material that lets smoke and water pass, or a partial closure leaves at least 10% open. Fira Barcelona also forbids fully closed ceilings.
  • Double decks. At IFEMA, a double deck or raised structure of 1.2 m or more carrying loads or people needs an assembly review certificate. In events organized by Fira de Barcelona, the upper floor may cover no more than 50% of the stand area.
  • Rigging. At IFEMA, rigging projects are due one month before assembly, per IFEMA’s rigging regulations (PDF). At Fira Barcelona, only Fira’s official supplier installs points, requested through Servifira.
  • Back walls. IFEMA requires a neutral finish on the back of stand walls, with no logos or lettering.

Which languages do you need?

Spanish is the working language on site, but both large venues publish key documents in English. IFEMA’s rigging regulations are available in English, and Fira Barcelona’s Gran Via Technical Regulations are published in English and state that rigging data must be submitted in Spanish or English. You do not need German translations of your drawings; you do need clear, dimensioned plans in metric units.

Our team replies within 24 hours and handles the paperwork with the venue technical offices.

Spanish fairs vs German habits: a quick comparison

Data point Value Source (linked) Date checked
German Pavilion, Anuga Select Ibérica 2027 February 16–18, 2027, Madrid german-pavilion.com Nov 17, 2026
German Pavilion, ibtm world 2027 November 2027, Barcelona; registration not yet open german-pavilion.com Nov 17, 2026
General stand height, IFEMA Madrid 4 m (one perimeter element up to 6 m) IFEMA general participation rules Nov 17, 2026
General stand height, Fira Barcelona Gran Via 5 m Fira Gran Via Technical Regulations, 3.3.1 Nov 17, 2026
Rigging project deadline, IFEMA One month before assembly IFEMA rigging regulations Nov 17, 2026
Language for rigging data, Fira Barcelona Spanish or English, SI units Fira Gran Via Technical Regulations, 3.7 Nov 17, 2026
AES design and build rates (approx.) Modular approx. €280–380/m²; custom wood approx. €450–650/m²; double-deck approx. €750–1,100/m² AES price calculator Nov 17, 2026

Quotable summary: German exhibitors in Spain work with venue-specific rules, such as a 4 m general height at IFEMA Madrid and 5 m at Fira Barcelona Gran Via, and can submit technical documents in English.

How should you plan the timeline?

Work backward from the venue deadlines, not from the show date. A practical sequence we recommend:

  1. Book space with the organizer and get the exhibitor manual and hall plan.
  2. Brief the stand: objectives, products, meeting needs, storage and power.
  3. Concept and 3D design against the venue’s height, wall and ceiling rules.
  4. Submit plans by the venue’s date. At IFEMA, an approved project is required before build-up; rigging is due one month before assembly.
  5. Order services such as power, rigging and cleaning through the venue’s official channels.
  6. Logistics: agree delivery slots and access with the builder.
  7. Build-up, show and dismantling, with a named contact on site.

Show days are often long. As one example, IFEMA lists 10:00–19:00 opening hours for the first two days of IberPet 2027 (checked on November 17, 2026). Check your fair’s hours before you plan staff rotas and flights.

What should a German team put in the stand brief?

A good brief saves a round of redesign, especially when the venue rules are new to your team. Include:

  • The plot number, size and open sides from the organizer’s floor plan.
  • The fair’s exhibitor manual and any rules that differ from the venue’s general rules.
  • Products to show, with dimensions and weights, and any that need power, water or a demonstration area.
  • Meeting needs: how many tables, whether you need a closed room, and storage for brochures and coats.
  • Brand files and any stand elements you already own and want to reuse.
  • Who signs off the design in Germany, and by when.

With that, we can check the concept against the venue’s rules before the 3D design, instead of after the venue sends comments.

How do logistics work from Germany?

Goods moving between Germany and Spain stay within the EU single market, so there are no customs formalities for EU goods. What needs planning is timing: venues assign unloading slots and access windows, and some limit how long a vehicle may stay in the loading area. Decide early whether exhibits travel with the stand or separately, and who receives them at the venue.

VAT on Spanish fair costs can sometimes be reclaimed. Read our guide to trade fair VAT refunds in Spain and Portugal and check with your tax advisor.

What does a stand in Spain cost?

Our calculator rates are approximate: modular from approx. €280–380/m², custom wood from approx. €450–650/m² and double-deck from approx. €750–1,100/m². Floor space and venue services are booked with the organizer and venue and are separate. Use the exhibition stand cost calculator for a first range, or sketch ideas with the AI stand designer.

Quick questions

Do we need a Spanish company to exhibit?

No. Organizers contract with foreign exhibitors directly; read the participation conditions of your fair.

Can a German builder build our stand in Spain?

Each venue sets its own builder requirements. Our IFEMA contractor rules guide explains Madrid.

Can we reuse a stand from a German fair?

Often, but check height, ceilings and material fire classes against the Spanish venue before shipping.

Exhibit in Spain with us

We are Adam Expo Stand, founded in 2018. Adam has worked in exhibitions since 2005, and we have completed 639+ projects in 12+ countries. Based in Madrid, Spain, serving all of Europe with a focus on Spain and Portugal. We design, build and install stands and reply within 24 hours. Request a free 3D design consultation.

Related pages: Exhibiting in Spain 2026–2027 · Stand builder at IFEMA Madrid · Fira Barcelona Gran Via technical guide · Cost calculator.

Similar Posts