Exhibition Stand Builder for Alicante: Stands at IFA Fira Alacant

If you are exhibiting in Alicante, the venue you will most likely use is IFA – Fira Alacant, the trade fair center between Alicante and Elche, next to the Alicante-Elche airport. Adam Expo Stand serves Alicante from our base in Madrid, Spain: we design, build and install custom, modular and turnkey stands at IFA without keeping a local office.

This page brings together what an exhibitor needs before booking a stand builder for Alicante: verified venue facts, the shows listed for 2026 and 2027, a planning timeline, the build options, and what affects the budget. Every venue fact links to the official IFA – Fira Alacant or organizer page, checked on 10 November 2026.

Where do trade fairs take place in Alicante?

Most trade fairs in the Alicante area take place at IFA – Fira Alacant, on the N-340 Alicante–Elche road at km 731, between the two cities. The venue sits a few minutes from the Alicante-Elche “El Altet” airport and, according to IFA, has direct access from the A-7 at exit 22.

IFA describes itself as an institution that has organized trade fairs since 1959 and receives more than 300,000 people and 2,000 companies annually, according to its about us page. Those are the organizer’s own figures. IFA hosts a full annual calendar of trade fairs (see IFA’s calendar). For stand planning, the more useful facts are physical:

  • Total space: 88,000 m², with 11 multipurpose rooms, two halls and indoor and outdoor auditoriums (IFA – about us).
  • Exhibition halls: built in 1991 and 1992, with 27,350 m² of net exhibition space; the halls are connected inside (IFA – halls).
  • Services in the halls: electricity, water, drainage, internet, climate control and LED lighting, according to the same page.
  • Parking: paid parking on site, with stays under 15 minutes free (IFA – FAQ).
  • Operator: Societat Valenciana Firalacant S.A., shown on the IFA website.

Note that the Futurmoda website gives the access as A-70, exit 22, while IFA’s own directions page says A-7, exit 22. We use the venue’s own page and recommend checking the route in your navigation app before build-up day.

Which shows are scheduled at IFA – Fira Alacant in 2026 and 2027?

The next shows confirmed on official pages are Firauto with Sobre 2 Ruedas on 20 to 22 November 2026, and the Alicante Tattoo Convention with JESAL-EXTETIC Hair Show Alicante on 5 to 7 March 2027. Futurmoda, the footwear components fair, holds a March and an October edition every year.

Show Sector Dates Source
Firauto (56th) + Sobre 2 Ruedas (24th) Cars and motorcycles 20–22 November 2026 IFA – Firauto
Alicante Tattoo Convention (9th) Tattoo 5–7 March 2027 IFA news, 20 July 2026
JESAL-EXTETIC / Hair Show Alicante Hair and beauty 5–7 March 2027 (shared dates) IFA news, JESAL-EXTETIC
Futurmoda Components, leather, textiles and machinery for footwear and leather goods March and October each year; 2027 dates not yet published Futurmoda
Expovans & Trucks Vans and trucks 2026 edition 8–10 May 2026; 2027 date not yet published IFA – Expovans

Futurmoda is the most relevant show for business-to-business stands in Alicante. Its organizer reports more than 300 exhibiting firms from Spain, Italy, Portugal, France and other countries, more than 12,000 m² of exhibition area and more than 5,000 visitors, with two-day editions open from 9:00 to 18:30 (Futurmoda). It publishes an exhibitor manual for each edition, which sets the build-up times and technical rules for that show.

How does a Madrid-based stand builder serve Alicante?

We plan and design the stand in Madrid, then coordinate production, transport to IFA, build-up and dismantling as a single project. Site visits, meetings with the organizer and on-site support during the show are scheduled around your timetable.

Working from Madrid has practical consequences that we explain at the first meeting:

  • Site visit. For a first project at IFA we recommend a site visit or a video walk-through of the hall before final drawings, so the design reflects the real service points and access routes.
  • Transport. The stand travels as one planned load. Reusable modular frames and stored custom elements can be sent again for the next edition.
  • Local suppliers. Where it makes sense, furniture rental, floral or catering can be booked locally through the organizer’s official suppliers.
  • One point of contact. You have one contact at Adam Expo Stand from the brief to dismantling, in English or Spanish.

We are based in Madrid, Spain, serving all of Europe with a focus on Spain and Portugal. Adam Expo Stand was founded in 2018, our founder Adam Dragos has worked in exhibitions since 2005, and we have delivered 639+ projects. We do not have an office in Alicante and we never present one; what you get is on-site presence at every stage that needs it.

When you send a brief, we reply within 24 hours.

How early should you plan a stand for an Alicante show?

Plan a custom stand four to six months before the show and a modular stand at least three months ahead. The exact technical deadlines come from each show’s exhibitor manual, so we build the schedule backwards from the manual as soon as the organizer publishes it.

IFA’s shows are run by different organizers and each one publishes its own rules. As a benchmark from larger Spanish venues, the 2027 manuals we checked at IFEMA Madrid ask for the stand project about four to five weeks before build-up, and Fira de Barcelona’s Gran Via regulations only guarantee services ordered at least two weeks before build-up. We apply the same discipline in Alicante:

  1. Four to six months out: confirm space and size, share the brief, agree the build route.
  2. Three months out: approve design, materials and graphics; check the exhibitor manual.
  3. Six to four weeks out: final drawings and any technical project required by the organizer; order electricity, water and internet.
  4. Two weeks out: graphics printed, transport booked, installation scheduled.
  5. Build-up: installation, inspection and handover before opening.

Two-day shows such as Futurmoda leave little room for error during build-up, so we prefer to check structures before they are transported.

What types of stand can you build at IFA – Fira Alacant?

We build three kinds of stand in Alicante: custom wood carpentry for brand-led stands with built counters and meeting rooms, Aluvision and beMatrix modular systems for exhibitors who return every edition, and turnkey packages that cover design, build, furniture, AV, graphics and on-site support under one contract.

Build route Good fit at IFA Reuse
Custom wood carpentry Brand launches, car and motorcycle displays, premium beauty stands Selected elements stored for the next edition
Aluvision or beMatrix modular Futurmoda exhibitors attending in March and October Frames and panels reconfigured for each edition
Turnkey Companies without a local events team Depends on the structure chosen

Because Futurmoda runs twice a year, a modular structure with changeable graphics is often the most efficient choice for its exhibitors: the frame is reused and only the fabric prints change with each collection. Our modular stands page explains the systems, our turnkey solutions page explains the full service, and the sustainability services page explains how reuse supports an eco-friendly approach.

How much does an exhibition stand in Alicante cost?

The total depends on the floor space, the build route, the organizer’s fees and the services you order. Stands start from €120/m², and the final figure depends on the design, materials and services you choose, before space rental, organizer services and transport.

That minimum is a starting point, not a quote. For an Alicante project, the rest of the budget usually comes from:

  • Space rental, set by each show’s organizer per m².
  • Organizer services such as electricity, water, internet and cleaning, ordered through the exhibitor manual.
  • Transport and travel from Madrid, which we quote as a separate line so you can see it.
  • Parking and logistics on site; IFA lists its current parking rates in its FAQ.
  • Optional items such as furniture rental, AV, hostesses and catering.

For a first range, use the exhibition stand cost calculator and test layouts with the AI stand designer. We then confirm every line against the show’s manual. When we quote, design, production, transport, installation, graphics and dismantling appear as separate lines, so you can compare proposals like with like and see what each part of the budget covers.

What should you check in an IFA exhibitor manual?

Check build-up and dismantling times, the deadline for any technical project, the services order form and its deadlines, rules on hanging elements and electrical installations, and the contact for the official contractor. Each show at IFA has its own manual, so a rule from one edition may change for the next.

When an organizer publishes a new version of its manual, we update the shared checklist and tell you which deadlines changed, so nobody on your team has to compare two PDF versions line by line. The points we review first in any Alicante manual are:

  • Build-up window. Two-day shows often have short build-up slots, which affects how much carpentry can be finished on site.
  • Electrical connection. The power you order must match the stand’s lighting, screens and machinery, especially for footwear machinery demonstrations at Futurmoda.
  • Water and drainage. Needed for beauty and hair demonstrations at shows such as JESAL-EXTETIC; the halls have water and drainage, but connections are ordered per stand.
  • Vehicle access. Car and motorcycle shows such as Firauto need a plan for moving vehicles in and out of the hall.
  • Insurance and safety documents required for everyone working on the stand during build-up.

Our IFEMA rules and paperwork guide shows how we handle similar documents at a larger venue, and our on-site build and dismantle guide explains each stage at the venue.

Do you also cover Valencia, Murcia and other venues near Alicante?

Yes. From Madrid we serve exhibitors across Spain and Portugal, including Feria Valencia, which hosts shows such as FIMI and Babykid on 20 to 22 January 2027 according to its published calendar. For each venue we follow the same process: verified manual, local logistics plan and one point of contact.

Feria Valencia’s 2026-2027 calendar, published as an advance edition dated 28 September 2026 and marked subject to change, also lists Forinvest on 24 and 25 February 2027 and SEPA27 on 26 to 29 May 2027 (Feria Valencia calendar, PDF). See our Valencia exhibition stand builder page for that venue, and exhibiting in Spain 2026-2027 for a wider overview.

How do you choose a stand builder for an Alicante fair?

Choose a stand builder for an Alicante fair by checking that one team covers design through dismantling and that the proposal is itemized. Adam Expo Stand works from Madrid across Spain, including IFA – Fira Alacant, and replies within 24 hours. Stands start from €120/m². The video below explains how to choose a stand builder in Spain.

Data table: exhibiting at IFA – Fira Alacant

Data point Value Source (linked) Date checked
Venue location N-340 Alicante–Elche, km 731; a few minutes from El Altet airport IFA – how to get there 10 Nov 2026
Total space 88,000 m²; 11 multipurpose rooms; 2 halls IFA – about us 10 Nov 2026
Net exhibition space in halls 27,350 m² (halls built 1991–1992) IFA – halls 10 Nov 2026
Trade fair activity Organizing fairs since 1959; full annual calendar of trade fairs IFA – about us, IFA calendar 10 Nov 2026
Parking Paid on-site parking; stays under 15 minutes free IFA – FAQ 10 Nov 2026
Firauto + Sobre 2 Ruedas 20–22 November 2026 IFA – Firauto 10 Nov 2026
Alicante Tattoo Convention + JESAL-EXTETIC 5–7 March 2027 IFA news 10 Nov 2026
Futurmoda size 300+ exhibitors; 12,000+ m²; 5,000+ visitors (organizer figures) Futurmoda 10 Nov 2026

In short: IFA – Fira Alacant offers 27,350 m² of net hall space next to Alicante-Elche airport, and its next confirmed shows are Firauto in November 2026 and JESAL-EXTETIC with the Tattoo Convention in March 2027.

Frequently asked questions

Do you have an office in Alicante?

No. We are based in Madrid and serve Alicante from there, traveling to IFA for site visits, build-up, the show and dismantling.

Which Alicante show is best suited to a modular stand?

Futurmoda, because it runs twice a year in March and October. A modular frame can be reused for both editions while the graphics change.

How far is IFA – Fira Alacant from the airport?

IFA says the venue is a few minutes from the Alicante-Elche “El Altet” airport, on the N-340 between Alicante and Elche.

Can you store our stand between editions?

Yes. Reusable modular frames and selected custom elements can be stored and sent back for the next edition, which supports our eco-friendly approach.

Are the 2027 Futurmoda dates published?

Not on the official site when we checked on 10 November 2026. Futurmoda confirms a March and an October edition each year; we will update this page when the dates appear.

What do you need for a first proposal?

The show name, stand size and number, open sides, what you want to display, any machinery or vehicles, and your brand guidelines.

Discuss your stand brief

Tell us which Alicante show you are planning, your stand size and what the stand needs to do. Discuss your stand brief or request a stand proposal.

More from Adam Expo Stand: Medium · Substack · LinkedIn

Similar Posts