Exhibition Stand Builder at FIBES Seville

Adam Expo Stand designs, produces and installs custom and modular exhibition stands for exhibitors at FIBES, the Palacio de Congresos y Exposiciones de Sevilla. Stands start from €120/m², and we reply to every brief within 24 hours. FIBES lists SIMOF from 14 to 17 January 2027 and FIRECA from 3 to 5 March 2027.

Quick facts

  • Since 2018, 639+ projects
  • Adam in trade fairs since 2005
  • Based in Madrid, Spain, serving all of Europe with a focus on Spain and Portugal.
  • Custom wood carpentry design and build, Aluvision and beMatrix modular systems, and turnkey stands
  • Bilingual team working in English and Spanish

Who builds exhibition stands at FIBES Seville?

Adam Expo Stand designs, produces and installs exhibition stands for companies exhibiting at FIBES in Seville. We handle the concept, the technical project for venue approval, production, transport, build-up, on-site support and dismantling, and we prepare the documentation FIBES requires from every stand builder before work starts on site.

That last point matters more at FIBES than at many venues. Every company that builds at FIBES must be approved as an authorized builder by CONTURSA, the company that manages the venue, and CONTURSA can approve or modify a stand project for safety reasons. We plan for that review from the first design. For a city overview, see our guide to the exhibition stand builder in Seville.

What is FIBES?

FIBES is the Palacio de Congresos y Exposiciones de Sevilla, active in the city since 1989 and managed by CONTURSA. It offers 50,000 m² across two large areas, Fibes I and Fibes II, joined by a large exhibition walkway, and it hosts trade fairs, congresses, concerts and large events.

The two areas work differently, according to the official FIBES spaces page:

  • Fibes I. Three large column-free pavilions of 7,200 m² each, under the venue’s landmark golden dome. This is where trade fairs such as SIMOF, FIRECA and SICAB are held, and where most stands are built.
  • Fibes II. The newer congress center, with an auditorium for more than 3,150 people and a 620 m² stage, four multipurpose rooms, and a central module with 1,450 m² that can be divided into rooms as needed.
  • Outdoor exhibition areas. Two triangular outdoor areas of 3,500 m² each.

FIBES sits in the east of Seville, between San Pablo airport and Santa Justa, the city’s main train station, with a direct Cercanías commuter rail connection. AVE high-speed trains link Seville with Madrid and Barcelona, which makes it practical to move a stand and a team from either city.

Which trade fairs take place at FIBES in 2026 and 2027?

The FIBES events calendar lists SICAB from 17 to 22 November 2026, SIMOF from 14 to 17 January 2027 and FIRECA from 3 to 5 March 2027, all in Fibes I. Other fairs are added to the official calendar as organizers confirm dates, so we check it again before every project.

Fair Sector Dates Hall Source
SICAB 2026 (36th edition) International show of the Pura Raza Española horse 17–22 November 2026 Fibes I FIBES: SICAB 2026
SIMOF 2027 International Flamenco Fashion Week 14–17 January 2027 Fibes I FIBES: SIMOF 2027
FIRECA 2027 Rescue, roadside assistance and emergencies, special vehicles and supporting industry 3–5 March 2027 Fibes I FIBES: FIRECA 2027

FIBES also hosts many national and international congresses, many with an exhibition area for sponsors and suppliers. Those exhibition areas follow the same venue rules as the fairs, so the planning steps on this page apply to congress stands too. The full list is on the FIBES fairs page and its events calendar.

What are the FIBES rules for stand builders?

FIBES publishes its build-up rules in a health and safety dossier. The key rules are approval of every builder by CONTURSA, a possible review of the stand project, fire-retardant certificates for fabrics and carpets, assembly certificates for truss, and a ban on painting, drilling or nailing into the venue’s floors, walls, doors and ceilings.

The FIBES health and safety dossier sets out the rules we work to:

  • Authorized builders only. Any company carrying out a build must be approved by CONTURSA as an authorized builder, and CONTURSA may approve or modify the project for safety or non-compliance.
  • Infrastructure fee. CONTURSA reserves the right to charge an infrastructure fee to companies that use their own services rather than CONTURSA’s suppliers, covering technical supervision and the use of common facilities. We include it in the budget when it applies.
  • Graphics on venue materials. Graphics on the venue’s aluminum are applied only by the provider CONTURSA manages, and venue modular stand panels are decorated only by approved providers unless the venue authorizes an exception.
  • Certificates. Fabrics and carpets need a fire-retardant certificate, and truss or staging structures need an assembly certificate.
  • No damage to the building. Painting, drilling or nailing into floors, walls, doors and ceilings is prohibited, as is covering the air-conditioning grilles or touching the building’s structural or electrical elements.
  • Hanging elements. Nothing may be hung outside the contracted exhibition space without CONTURSA’s authorization.
  • Equipment from outside. Cranes, forklifts and similar machinery need full documentation, insurance and operator training records, and must leave the venue before the event opens.

How do access and working hours work during build-up at FIBES?

Venue technical staff work from 08:00 to 20:00, Monday to Sunday, on build-up and event days. Work outside those hours needs advance notice and approval from the venue’s commercial department, and the requester covers the extra security, technical staff and rental costs it causes.

Access depends on who organizes the event:

  • Events organized or co-organized by CONTURSA. Builders accredited by the event organizer enter with that accreditation. Builders who are not accredited, or external companies that are not CONTURSA suppliers, must upload company and worker health and safety documents to a coordination platform, and the documents must be validated before access.
  • Events run by an outside organizer. CONTURSA coordinates with the organizer, and the organizer then informs and accredits every external company, including for build-up and dismantling. Only authorized and accredited staff may enter.

Vehicle access for loading and unloading uses dedicated gates and service roads for each building, set out in the dossier. We agree the delivery slot and the gate with the organizer before transport is booked, so the stand arrives at the right building on the right day.

How should you brief a stand for FIBES?

A good FIBES brief covers the event and hall, whether you are in Fibes I, Fibes II or an outdoor area, the plot size and open sides, the products you will show, the services you need, and whether the event is run by CONTURSA or an outside organizer, because that decides the access paperwork.

The checklist we send exhibitors:

  1. Event, building and plot. Fibes I, Fibes II or outdoor, the plot size in m² and the organizer’s floor plan.
  2. Organizer. CONTURSA or an outside organizer, which decides accreditation and documentation.
  3. Exhibits. Sizes and weights of products, vehicles or equipment, and any live demonstrations.
  4. Services. Electricity, internet and any special needs, ordered through the organizer.
  5. Hospitality. Meetings, storage and any catering on the stand.
  6. Brand assets. Logo files, images and graphics from earlier fairs that can be reused.

With these six points we can prepare a first design proposal and a clear quote. When CONTURSA organizes the event and we are not accredited through the organizer, we start the coordination platform documents early, because access during build-up depends on validated paperwork as much as on a finished design.

Which type of stand works best at FIBES?

The column-free pavilions of Fibes I allow open layouts, island stands and long brand walls, so all three routes work: custom wood carpentry for a stand built around the brand, an Aluvision or beMatrix modular system for exhibitors on a fair circuit, or a turnkey package that includes design, furniture, graphics and services.

Build route When it fits at FIBES Reuse
Custom wood carpentry design and build Fashion and lifestyle fairs where finishes and lighting carry the brand Selected elements stored and reused
Aluvision or beMatrix modular Exhibitors attending several Spanish fairs a year Frames and panels reconfigured per fair
Turnkey Congress sponsors and companies without an events team in Spain Depends on the structure chosen

Because FIBES prohibits drilling or fixing into the building, every stand must be self-supporting, and graphics on venue materials go through approved providers. We design freestanding structures from the start. Our modular stands and turnkey solutions pages explain each option, and our sustainability services page explains how reuse supports an eco-friendly approach.

How much does a stand at FIBES cost?

Stands start from €120/m². The final price depends on the design, materials, plot size, number of open sides and services. Space rental, venue services and any infrastructure fee CONTURSA applies to outside builders are separate lines, set by the organizer and the venue for each event.

That minimum is a starting point rather than a quote. The lines that change the total most at FIBES are:

  • Space rental, priced by the event organizer.
  • Venue services, such as electricity, internet and cleaning.
  • Infrastructure fee, when CONTURSA applies it to builders using their own services.
  • Transport and storage of the stand between fairs.

For a first range, use our exhibition stand cost calculator and test layouts with the AI stand designer.

Where else in Spain do we build stands?

We serve exhibitors at the main Spanish venues, so one team can follow your fair calendar from Seville to Madrid, Barcelona, Bilbao, Valencia and Zaragoza. Each venue has its own page with verified rules and dates, and our locations hub lists every city and venue we serve in Spain and Portugal.

Adam Expo Stand was founded in 2018, and our founder Adam Dragos has worked in trade fairs since 2005. We are an award-winning, eco-friendly stand designer and builder, and we reply to every brief within 24 hours.

How do you choose a stand builder for FIBES?

Choose a builder that knows the CONTURSA approval process, prepares the health and safety documents, designs freestanding structures and can show a clear quote. This short video from our @DisenoStandsFerias channel covers what to check when choosing an exhibition stand builder in Spain.

Data table: FIBES Seville for exhibitors

Data point Value Source (linked) Date checked
Total space 50,000 m² in two areas, Fibes I and Fibes II FIBES home page 10 Nov 2026
Active since 1989 FIBES home page 10 Nov 2026
Fibes I pavilions Three column-free pavilions of 7,200 m² each FIBES spaces 10 Nov 2026
Fibes II auditorium More than 3,150 people, 620 m² stage FIBES spaces 10 Nov 2026
Outdoor exhibition areas Two triangular areas of 3,500 m² FIBES spaces 10 Nov 2026
SICAB 2026 17–22 November 2026, Fibes I FIBES: SICAB 2026 10 Nov 2026
SIMOF 2027 14–17 January 2027, Fibes I FIBES: SIMOF 2027 10 Nov 2026
FIRECA 2027 3–5 March 2027, Fibes I FIBES: FIRECA 2027 10 Nov 2026
Technical staff hours 08:00–20:00, Monday to Sunday, build-up and event days FIBES health and safety dossier (PDF) 10 Nov 2026
Builder approval Every builder must be approved by CONTURSA FIBES health and safety dossier (PDF) 10 Nov 2026

In short: FIBES offers 50,000 m² in Seville, with three column-free 7,200 m² pavilions in Fibes I, and every stand builder must be approved by CONTURSA before building there.

Frequently asked questions

Do you build stands at FIBES Seville?

Yes. We design, produce and install custom and modular stands at FIBES, prepare the documentation CONTURSA requires, and reply to every brief within 24 hours.

Which fairs are held at FIBES in 2027?

The FIBES calendar lists SIMOF from 14 to 17 January 2027 and FIRECA from 3 to 5 March 2027, both in Fibes I. SICAB runs from 17 to 22 November 2026.

Does every stand builder need approval at FIBES?

Yes. Any company building at FIBES must be approved by CONTURSA as an authorized builder, and CONTURSA can approve or modify a stand project for safety reasons.

Can I drill or hang elements at FIBES?

No drilling, painting or nailing into the building is allowed, and nothing may be hung outside your contracted space without CONTURSA’s authorization. Stands must be freestanding.

Can I work outside normal build-up hours?

Only with advance notice and the venue’s approval. The requester covers the extra security, technical staff and rental costs.

What is the minimum price for a stand?

Stands start from €120/m². Space rental, venue services and any infrastructure fee are separate lines.

Discuss your stand brief

Tell us which FIBES event you are planning, your plot size and what you will show. Discuss your stand brief or request a stand proposal.

More from Adam Expo Stand: Medium · Substack · LinkedIn